Size of boot image is 10240 sectors -> No emulation Size of boot image is 288504 sectors -> No emulation 6.69% done, estimate finish Mon Nov 15 18:05:23 2004

13.39%

done, estimate finish Mon Nov 15 18:05:31 2004

20.07%

done, estimate finish Mon Nov 15 18:05:28 2004

26.77%

done, estimate finish Mon Nov 15 18:05:27 2004

33.45%

done, estimate finish Mon Nov 15 18:05:26 2004

40.15%

done, estimate finish Mon Nov 15 18:05:26 2004

46.83%

done, estimate finish Mon Nov 15 18:05:26 2004

53.54%

done, estimate finish Mon Nov 15 18:05:25 2004

60.21%

done, estimate finish Mon Nov 15 18:05:25 2004

66.92%

done, estimate finish Mon Nov 15 18:05:25 2004

73.60%

done, estimate finish Mon Nov 15 18:05:25 2004

80.30%

done, estimate finish Mon Nov 15

18:05:25 2004

86.98%

done, estimate finish Mon Nov 15

18:05:25 2004

93.68%

done, estimate finish Mon Nov 15

18:05:25 2004

Total translation table size: 2048

 

Total rock ridge attributes bytes: 0

Total directory bytes: 0

Path table size(bytes): 10 Max brk space used 9000

74736 extents written (145 Mb)

6.Ensure that there are no mkisofs command errors. Older versions of mkisofs do not accept the -no-emul-bootoption given twice, only accept the use of the –boption once, and would not accept the -eltorito-alt-bootoption at all.

7.Place a LIF directory at the start of the ISO image with the instl_combine command so that the media will boot:

#/opt/ignite/lbin/instl_combine -C cdfs.out

HP Integrity systems do not require a LIF to be present to boot (PA-RISC systems do), but the kernel loader used to install Itanium®-based systems does read the installation kernel and file system from the LIF. Later in the installation process, other files will also be read from the LIF.

For more information regarding how to create custom installation media, refer to the Ignite-UX Administration Guide.

8.You can now write the ISO image onto a CD. The ISO image created in this example was written onto the CD using Cdrecord on an Itanium®-based system:

# cdrecord -data -v speed=4 dev=4,0,0 /var/tmp/cdfs.out

It is important to realize that some Windows-based CD writing software cannot create CDs that will boot on Itanium®-based systems. The CDs produced by some CD writing software may boot PA-RISC systems, but fail to boot Itanium®-based systems.

This CD, like a tape created by make_boot_tape, allows you to boot a system locally so that it can contact an Ignite-UX server. In addition, this media is capable of performing a dual-media recovery. For more information regarding dual-media recovery, refer to the Ignite-UX Administration Guide.

210