hp L1520/hp L1720/hp L1820 LCD Monitor Using the Monitor

To use Mode Recall

1Open the Mode Recall setting screen. See “Using the On-Screen Display Manager (OSD)” on page 27. A window with a red bar appears.

2Press the Select button to proceed with Mode Recall, or press the Menu button to exit without resetting.

3If you reset with Mode Recall, press the Menu button to exit the setting screen.

Backlight Info

The Backlight Info window shows the elapsed time of usage for the light behind the display screen. The expected lifespan of the backlight is approximately 30,000 to 40,000 hours. At some point after the maximum usage time of the backlight has been exceeded, you may notice a decrease in brightness of up to 50%. At this point, the backlight needs to be replaced to restore full brightness.

WARNING: The backlight can be replaced only by a trained technician. Please contact the HP Support Center for assistance. Do not attempt to replace the light yourself.

NOTE: Do not use a screen saver with the LCD monitor, as the backlight will be used. It is recommended that you enable an automatic power saving mode on the PC, or switch off the monitor when not in use.

To view Backlight Info:

1Open the Backlight Info setting screen. See “Using the On-Screen Display Manager (OSD)” on page 27. The elapsed time is displayed.

English 35