Yamaha RX-V1600 owner manual Auto Setup, Error message, Cause, Remedy

TROUBLESHOOTING

■AUTO SETUP

Before AUTO SETUP

Error message	Cause	Remedy	See
			page
Connect MIC!	Optimizer microphone is not connected.	Connect the supplied optimizer microphone to the	32
		OPTIMIZER MIC jack on the front panel.
Unplug HP!	Headphones are connected.	Unplug the headphones.	—

During AUTO SETUP

Error message	Cause	Remedy	See
			page
E-1:NO FRONT SP	Front L/R channel signal(s) is (are) not	Select the front speakers with SPEAKER A or B.	—
	detected.	Check the front L/R speaker connections.	15
E-2:NO SURR.SP	A surround channel signal is not detected.	Check the surround speaker connections.	15
E-3:NO PRNS SP	A presence channel signal is not detected.	Check the presence speaker connections.	15
	Only right surround back channel signal is	Connect the surround back speaker to the LEFT
E-4:SBR->SBL		SURROUND BACK SPEAKERS terminal if you	15
	detected.
		only have one surround back speaker.
		Try running AUTO SETUP in a quiet environment.	—
E-5:NOISY	Background noise is too loud.
		Turn off noisy electric equipment like air conditioners	—
		or move them away from the optimizer microphone.
	Surround back speaker(s) is (are)	Connect surround speakers when you use (a)
E-6:CHECK SUR.	connected, though surround L/R speakers		15
		surround back speaker(s).
	are not.
E-7:NO MIC	The optimizer microphone was unplugged	Connect the supplied optimizer microphone to	32
	during the AUTO SETUP procedure.	OPTIMIZER MIC jack on the front panel.
E-8:NO SIGNAL	The optimizer microphone does not detect	Check the microphone setting.	32
	test tones.	Check the speaker connections and placement.	15
E-9:USER CANCEL	The AUTO SETUP procedure was	Run AUTO SETUP again.	32
	cancelled due to user activity.
E-10:INTERNAL	An internal error occurred.	Run AUTO SETUP again.	32
ERROR

108