Yamaha RX-V1600 owner manual Auto Setup, Introduction, Optimizer microphone setup, Notes

AUTO SETUP

Introduction

This receiver employs YAMAHA Parametric Room Acoustic Optimizer (YPAO) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments. The supplied optimizer microphone collects and analyzes the sound your speakers produce in your actual listening environment.

Notes

•Please be advised that it is normal for loud test tones to be output during the AUTO SETUP procedure.

•If the AUTO SETUP procedure stops and error messages appear on the screen, follow the troubleshooting on page 108.

YPAO performs the following checks and makes appropriate adjustments to give you the best possible sound from your system.

WIRING

Checks which speakers are connected and the polarity of each speaker.

DISTANCE

Checks the distance of each speaker from the listening position and adjusts the timing of each channel.

SIZE

Checks the speaker’s frequency response and sets the appropriate low frequency crossover for each channel.

EQ

Adjusts frequency and levels of each channel’s parametric equalizer to reduce coloration across the channels and create a cohesive sound field. This is particularly important if you use different brands or sizes of speakers for some channels or have a room with unique sonic characteristics.

YPAO equalizing calibration incorporates three parameters (frequency, level and Q factor) for each of the seven bands in its parametric equalizer to provide highly precise automatic adjustment of frequency characteristics.

LEVEL

Checks and adjusts the volume level of each speaker.

Optimizer microphone setup

1Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel.

(General model)

AUDIO	MULTI CH		PRESET/		PRESET/			TUNING	TONE
SELECT	INPUT	A/B/C/D/E	TUNING		TUNING	FM/AM	MEMORY	MODE	STRAIGHT CONTROL
					EDIT		MAN'L/AUTO FM	AUTO/MAN'L	EFFECT
		SPEAKERS				ZONE ON/OFF ZONE CONTROL
				MULTI ZONE					PROGRAM
		A	B			ZONE 2	ZONE 3
		YPAO	SILENT CINEMA	S VIDEO	VIDEO	L AUDIO R		OPTICAL
		OPTIMIZER	PHONES
		MIC			VIDEO/AUX

Notes

•After you have completed the AUTO SETUP procedure, be sure to disconnect the optimizer microphone.

•The optimizer microphone is sensitive to heat.

–Keep it away from direct sunlight.

–Do not place it on top of this unit.

2Place the optimizer microphone on a flat level surface with the omni-directional microphone head upward, at your normal listening position.

If possible, use a tripod (etc.) to affix the optimizer mic at the same height as your ears would be when you are seated in your listening position.

Optimizer microphone position

32