CONNECTIONS
Connecting the power cable
Connecting the AC power cable
Plug the supplied AC power cable into the AC inlet after all other connections are complete, then plug the AC power cable to an AC wall outlet.
CAUTION
Use the supplied AC cable. Do not use other AC power cables as doing so may result in fire hazard or electrical shock.
VOLTAGE
SELECTOR
AC IN
Turning on and off this unit
When all connections are complete, turn on the power of this unit.
1,4 2,3
(General model)
|
|
|
|
|
|
|
|
|
|
|
| PURE DIRECT |
|
|
|
|
|
|
|
|
|
|
|
| VOLUME |
|
| AUDIO | MULTI CH |
| PRESET/ |
| PRESET/ |
|
|
| TUNING | TONE |
|
| SELECT | INPUT | A/B/C/D/E | TUNING |
| TUNING | FM/AM | MEMORY | MODE | STRAIGHT CONTROL | |
MAIN ZONE | INPUT |
|
|
|
| EDIT |
| MAN'L/AUTO FM | AUTO/MAN'L | EFFECT | ||
|
|
|
| SPEAKERS |
|
| ZONE ON/OFF | ZONE CONTROL |
| |||
|
|
|
|
|
| MULTI ZONE |
|
|
|
| PROGRAM | |
|
|
|
| A | B |
|
| ZONE 2 | ZONE 3 |
|
|
|
| ON/OFF |
|
| YPAO | SILENT CINEMA | S VIDEO | VIDEO | L AUDIO R |
| OPTICAL |
| |
MASTER |
|
| OPTIMIZER | PHONES |
|
|
|
|
|
|
| |
|
| MIC |
| VIDEO/AUX |
|
|
| |||||
ON | OFF |
|
|
|
|
|
|
|
|
|
|
|
AC OUTLETS |
SWITCHED |
50W MAX.TOTAL |
1Press MASTER ON/OFF on the front panel inward to the ON position to turn on the power of this unit.
•Only this unit is turned on.
•Zone 2 and Zone 3 are set to the standby mode.
(General model) | MASTER |
|
AC OUTLET(S) (SWITCHED) |
|
U.K. and Australia models | 1 outlet |
Korea model | None |
Other models | 2 outlets |
Use these outlets to supply power to any connected components. Connect the AC power cables of your other components to these outlets. Power to these outlets is supplied when the main room, Zone 2 or Zone 3 is turned on. However, power to these outlets is cut off when the main room, Zone 2 and Zone 3 are turned off or when MASTER ON/OFF on the front panel is pressed and released outward to the OFF position. The maximum power or the total power consumption of the components that can be connected to these outlets is as follows.
Asia and General models | ........................................... 50 W |
Other models | 100 W |
VOLTAGE SELECTOR
(Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are as follows:
Asia model | AC | 50/60 Hz |
General model | AC | 50/60 Hz |
Memory
The memory
ON OFF
2Press MAIN ZONE ON/OFF on the front panel (or STANDBY on the remote control) to set this unit to the standby mode.
STANDBY
ON/OFFor
Front panel | Remote control |
30