ASTANDBY
Sets this unit, Zone 2 and Zone 3 to the standby mode (see page 30).
Note
This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.
BPOWER
Turns on this unit, Zone 2 and Zone 3 (see page 30).
Note
This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.
CAUDIO SEL
Toggles the priority for the type of audio input jack between AUTO, HDMI, COAX/OPT and ANALOG when one component is connected to two or more input jacks on the rear panel (see page 43).
DSLEEP
Sets the sleep timer.
EMULTI CH IN
Selects MULTI CH INPUT when using an external decoder, etc.
FSELECT k / n
Selects another input source that you can control independently of the input source selected with the input selector buttons.
GVOLUME +/–
Increases or decreases the volume level.
HAMP/SOURCE/TV
Selects the component you want to control with the remote control.
AMP
Set to this position to operate this unit.
SOURCE
Set to this position to operate the component selected with an input selector button.
TV
Set to this position to operate the television assigned to either DTV or PHONO.
Note
If televisions are assigned to both DTV and PHONO, the one assigned to DTV takes priority and gets operated when AMP/ SOURCE/TV is set to TV.
y
To set the remote control codes for other components, see page 87.
IMUTE
Mutes the sound. Press again to restore the audio output to the previous volume level.
CONTROLS AND FUNCTIONS
JPURE DIRECT
Turns on or off the PURE DIRECT mode (see page 41).
KSET MENU
Enters or exits the SET MENU mode.
LNIGHT
Turns on or off the night listening modes (see page 41).
MON SCREEN
Selects the display mode of the
NSTRAIGHT (EFFECT)
Switches the sound field programs off or on. When STRAIGHT is selected,
OSPEAKERS A/B
Turns on or off the set of front speakers connected to the SPEAKERS A and/or B terminals on the rear panel each time the corresponding button is pressed.
P
Changes the name of the input source in the display window (see page 91).
QCLEAR
Clears remote control codes or functions acquired from the learn, macro and rename features (see page 94).
RLEARN
Programs remote control codes or functions from other remote controls (see page 89).
SRadio Data System tuning buttons (U.K. and Europe models only)
These buttons are operational only when TUNER is selected as the input source.
FREQ/TEXT
Switches the Radio Data System display between the PS mode, PTY mode, RT mode, CT mode (if the station offers the corresponding data services) and the frequency display (see page 52).
PTY SEEK MODE
Sets this unit to the PTY SEEK mode (see page 53).
PTY SEEK START
Starts searching for a station after the desired program type has been selected in the PTY SEEK mode
(see page 53).
EON
Selects a radio program type (NEWS, INFO, AFFAIRS, SPORTS) tune in automatically (see page 54).
INTRODUCTION
English
9