Yamaha RX-V1600 owner manual Hdmi, Notes, Warning message, Cause, Remedy, Error message

TROUBLESHOOTING

After AUTO SETUP

Warning message	Cause	Remedy	See
			page
	Speaker polarity is not correct. This
W-1:OUT OF PHASE	message may appear depending on the	Check the speaker connections for proper polarity	15
	speakers even when the speakers are	(+ or –).
	connected correctly.
W-2:OVER 24m (80ft)	The distance between the speaker and the	Bring the speaker closer to the listening position.	—
	listening position is over 24 m.
		Readjust the speaker installation so that all speakers	—
		are set in locations with similar conditions.
	The difference of volume level among
W-3:LEVEL ERROR		Check the speaker connections.	15
	speakers is excessive. (No level correction
	is made.)	Use speakers of similar quality.	—
		Adjust the output volume of the subwoofer.	33

Notes

•If the ERROR or WARNING screens appears, check the cause of the problem, then perform the AUTO SETUP procedure again.

•If warning W-1 appears, corrections are made, but they may not be optimal.

•If warning W-2 or W-3 appears, no corrections are made.

•If error E-10 occurs repeatedly, please contact a qualified YAMAHA service center.

■HDMI

Error message	Cause	Remedy	See
			page
DEVICE OVER	More than 5 HDMI components including	Reduce the number of the connected HDMI	—
	this unit are connected.	components.
HDCP ERROR	HDCP testing failed.	Check that the connected HDMI components support	—
		the HDCP copy protection standards.

INFORMATION	ADDITIONAL
English

109