Pioneer BDP-52FD operating instructions Changing the settings, Operating the Initial Setup, Screen

BDP-52FD_UCXCNSM_IBD_EN.book 41 ページ ２０１１年８月１９日 金曜日 午後１２時２３分

Chapter 7			07
Advanced settings
Changing the settings	Operating the Initial Setup
	screen
	1	When playback is stopped, display the Home
	Menu screen.
	Press		HOME MENU.
	2	Select and set Initial Setup.
	Use / to select, then press ENTER.
	3	Select the item and change the setting.
	Use /// to select, then press ENTER.
	 Closing the Initial Setup screen
	Press		HOME MENU or RETURN.

Note

•Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status.

•In Options, the factory default settings are indicated in bold.

	Setting
Display Setting	TV Screen

Options	Explanation
16:9 Full	Select this when connecting to a wide (16:9) TV.
16:9 Normal	Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
	video will be played with the left and right sides of the image cut off to display
	on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)
4:3 Pan&Scan	Select this when connecting to a conventional (4:3) TV.
4:3 Letterbox	Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
	video will be played with black bands at the top and bottom.

Video Adjust	Brightness	Select this to adjust the TV screen’s brightness .
	Contrast	Select this to adjust the TV screen’s contrast.
	Hue	Select this to adjust the color (green and red) balance of the TV screen.
	Saturation	Select this to adjust the TV screen’s saturation .
Sharpness	High	Choose the level of sharpness.
	Middle
	Low
Video Mode	Standard	Choose the video output mode.
	Vivid
	Cinema
	Custom
Noise Reduction	0	Choose the level of noise reduction.
	1
	2
	3

41

En