Pioneer BDP-52FD

Connecting components

to the USB port

The data downloaded with the BD-LIVE function and the

data used with the BONUSVIEW function when playing

BD-ROMs can be stored on a device connected to the

USB port (USB memory).

About USB memory devices

The USB memory devices that can be connected to the

player are as shown below.

• USB 2.0-compatible memory devices

• FAT16 or FAT32 file system, minimum 1 GB capacity

(2 GB or more recommended)

Note

• Devices formatted with a file system other than the

above cannot be used. Such devices may however be

usable if they are formatted from the player.

• USB memory devices may not be recognized if they

contain multiple partitions.

• Some USB memory devices may not operate with this

player.

• Operation of USB memory devices is not guaranteed.

Connecting the USB memory

device

Caution

• Be sure to turn the player’s power off before

connecting or disconnecting USB memory devices.

• Use empty USB memory devices (on which nothing is

stored).

• If the USB memory device is write-protected, be sure

to disable the write-protection.

• Placing excessive loads on the plug may result in

poor contact, making it impossible to write data on

the USB memory device.

• When a USB memory device is connected and the

player’s power is turned on, do not unplug the power

cord.

• USB external hard disks cannot be connected to the

player.

Note

• Devices may not work if connected to the USB port via

a memory card reader or USB hub.

USB memory device

Player’s front panel

USB memory device

Player’s rear panel

BDP-52FD_UCXCNSM_IBD_EN.book 21 ページ２０１１年８月１９日　金曜日　午後１２時２３分