Pioneer BDP-52FD operating instructions 48k, Auto, YCbCr, Off, Yes

BDP-52FD_UCXCNSM_IBD_EN.book 42 ページ ２０１１年８月１９日 金曜日 午後１２時２３分

07

Audio Output

Setting

Digital Output

Downsampling

Options	Explanation
Bitstream	Select this to output digital audio signals directly.
PCM	Select this to output digital audio signals converted to PCM audio signals.
Re-encode	Select this to output digital audio signals converted to DTS Digital Surround.
Off	Select this to output audio signals other than digital audio signals.
48k	Select this when playing a disc recorded with a sampling frequency of 48 kHz.
96k	Select this when playing a disc recorded with a sampling frequency of 96 kHz.
192k	Select this when playing a disc recorded with a sampling frequency of 192
	kHz.

DRC (Dynamic Range Control)

*Only Dolby digital and analog audio signals are supported.

HDMI Color Space

Resolution

HDMI Audio Out

Off	Select this to output audio signals without using the DRC function.
On	Select this to adjust the range between the loudest and softest sounds
	(dynamic range) for playback at average volume. Use this when it is hard to
	hear dialog or when watching movies at midnight.
Auto	Select to switch the DRC setting On/Off automatically according to the input
	audio signal from the disc.
RGB	Select this to output the video signals as RGB signals. Choose this if the
	colors seem too faint and the black seems too bright.
YCbCr	Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 422	Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB	Select this to output the video signals as RGB signals. Choose this if the
	colors seem too dense and all the dark colors are displayed in a uniform
	black.
Auto	Select this to choose the resolution of the video signals output from the
	HDMI OUT terminal automatically.
480I/576I	Output the video signals from the HDMI OUT terminal with the selected
	resolution.
480P/576P
	The resolution can be changed by pressing HDMI, but Auto cannot be
720P
	selected.
1080I
1080P
Bitstream	Select this to output HDMI audio signals directly.
PCM	Select this to output HDMI audio signals converted to 2-channel audio
	signals.

	Re-encode	Select this to choose the type of audio signals automatically.
	Off	Select this when you do not want to output the audio signal from the HDMI
		output terminal.
Control	On	Select this to control the player with the remote control of the connected AV
		device using an HDMI cable. Also refer to page 17.
	Off	Select this when you do not want to control the player with the remote control
		of the connected AV device using an HDMI cable.

To use PQLS, Sound Retriever Link and Stream Smoother Link (page 17), Control must be set to On.

HDMI Deep color	30bits	Select this when outputting the video signals with 30-bit color.
	36bits	Select this when outputting the video signals with 36-bit color.
	Off	Select this when outputting the video signals with normal 24-bit color.
HDMI 1080P 24Hz	On	Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
		video signals to a TV compatible with 1080p/24.
	Off	Select this when Resolution is set to 1080P and outputting 1080p/60 video
		signals to a TV compatible with 1080p/60.
HDMI 3D	Auto	With 3D discs, the disc is played with 3D images.
	Off	Even with 3D discs, the disc is played with 2D images.
3D notice	Yes	This sets whether or not to display the 3D notice when playing 3D images.
	No

42

En