HP LC3760N Using the First-Time Setup Wizard, Initial Setup, Language setting, Antenna setting

Using the First-Time Setup Wizard

Initial Setup

When turning on the TV for the first time, it automatically memorizes the channels where you live. Perform the following steps before you press TV Power on the remote control unit:

1Insert the batteries into the remote control unit.

2Connect the antenna cable to the TV.

3Plug in the AC cord to the AC outlet.

Language setting

Select from among three languages: English, French, or Spanish:

1Press the up arrow and down arrow buttons on the remote control to select the desired language listed on the screen.

2Press OK.

Standby mode setting

1Select the standby mode setting.The default setting is Mode 2.

■Mode 1: Starting TV is quick from standby.

■Mode 2: Power consumption is low when in standby.

Language
Standby Mode
Air/Cable	Mode 1
CH Search
	Mode 2

2Press OK.

Antenna setting

1Press the left arrow and right arrow buttons on the remote control to select Air or Cable.

2Press OK.

Using the First-Time Setup Wizard

Using the First-Time Setup Wizard 19