1 Product Features

HP LP2480zx Model

The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT) panel. The monitor features include:

●RGB LED backlight for wider color gamut support, better color and luminance uniformity on the screen, and better color and luminance stability

●Wide 105% NTSC color gamut to enable accurate color gamut remapping for Adobe-RGB and sRGB

●IPS 61 cm (24-inch)1920 x 1200 panel for the best available LCD panel color performance

●True 10-bit panel to increase supported colors from 16.7 million (8-bit) to 1.07 billion colors and reduce color banding

●Panel support for refresh rates of 48Hz, 50Hz, and 60Hz to enable video with these refresh rates to be displayed without frame rate conversion and the artifacts this process causes

●Ability to accurately remap the color gamut of the monitor (within the supported color gamut of the panel) to enable the selection of the color space and very accurately set the RGB primaries for consistent and repeatable colors

●Adjustable white point of 4K to 12K using the LED backlight (no loss of dynamic range) to provide maximum flexibility

●Adjustable gamma of 1.0 to 3.0 with a step size of 0.1 to provide maximum flexibility

●Adjustable luminance of 50 to 250 cd/m2 with a wide adjustment range for maximum flexibility in a working environment and ability to adjust down to very low luminance levels (50 cd/m2)

●Very high color and luminance stability (with typical use) and calibration only needed every 1000 hours, which means the monitor will not require frequent calibrations

●Ability to set up color space presets and choose the RGB primaries, luminance, gamma, and white point to allow you to quickly switch between different monitor color settings

●Calibrated color space factory presets for Adobe-RGB, Rec. 709, sRGB, SMPTE-C, and DCI-P3 Emulation so the monitor is ready to use for color critical applications with minimal setup

●Typical 100% Adobe-RGB coverage for very accurate support of this common color space

●Option to return to Factory Calibration settings to easily restore the monitor to the factory settings

●Option to easily return to last User Calibration settings in case the new calibration was not successful

HP LP2480zx Model 1