HP M-TN 8 PARTS LIST AND DRAWINGS, 8.1 Sectional drawings

MHP-TN USER INSTRUCTIONS ENGLISH 71576313 - 02/07

8 PARTS LIST AND DRAWINGS

8.1 Sectional drawings

9331

Page 26 of 28

flowserve.com

Contents

Page CONTENTS INDEX 1 INTRODUCTION AND SAFETY 1.1 General 1.2 CE marking and approvals 1.3 Disclaimer 1.4 Copyright 1.6 Safety Gland packing must not be used when pumping hazardous liquids 1.6.4Products used in potentially explosive atmospheres 1.6.4.1 Scope of compliance Page 1.7 Nameplate and safety labels 1.8 Specific machine performance 1.9 Noise level 2 TRANSPORT AND STORAGE 2.1 Consignment receipt and unpacking 2.2 Handling 2.3 Lifting 2.4 Storage 2.5 Recycling and end of product life 3 PUMP DESCRIPTION 3.1 Configurations 3.2 Nomenclature 3.3 Coverage charts 4 INSTALLATION 4.1 Location 4.2 Foundation 4.3 Grouting 4.4 Initial alignment 4.5 Piping 4.6 Electrical connections 4.7 Final shaft alignment check 4.8 Protection systems 5 COMMISSIONING, START-UP,OPERATION AND SHUTDOWN 5.1 Direction of rotation 5.2 Guarding 5.4 Starting the pump 5.5 Running the pump 5.6 Stopping and shutdown 5.7Hydraulic, mechanical and electrical duty 6MAINTENANCE6.1 General 5.8Pumps for Food Use or Potable Water 6.2 Maintenance schedule 6.2.4 Gland packing 6.2.4.1 Pump fitted with a packed gland 6.2.4.2 Gland packing inspection and removal 6.2.4.3 Gland packing fitting SETTING OF PACKING 6.3 Spare parts 6.4Recommended spares and consumable items 6.5 Disassembly FLOWSERVE 7 FAULTS; CAUSES AND REMEDIES 8 PARTS LIST AND DRAWINGS 8.1 Sectional drawings 8.2 Sectional drawings part list 8.3 General arrangement drawing 9 CERTIFICATION 10 OTHER RELEVANT DOCUMENTATION AND MANUALS 10.1 Supplementary User Instructions Your Flowserve factory contacts: Local Flowserve factory representatives: