Replacing the Side Panel
1Slide the side panel forward on the frame until it locks into place.
2Align the thumbscrews on the side panel with the holes on the back of the chassis frame, and then tighten the thumbscrews on the side panel.
3See “After Closing the PC” on page 2.
Removing the Front Panel
This procedure is necessary only when removing or replacing an optical drive, a memory card reader, or a hard disk drive.
1Locate the three small tabs attached to the front panel on the side of the chassis.
2Press each tab away from the center of the chassis. Press the top, the middle, and the bottom tab, and then gently remove the front panel.
Replacing the Front Panel
1Place the chassis upright, and then align the bottom of the front panel with the ridge on the bottom of the chassis.
2Guide the three small tabs on each side of the front panel into the correct holes until the panel snaps into place.
Upgrading and Servicing Guide 3