HP M637, M447, M547 manual Using the Burst setting

Chapter 3

TIP: If you want to include yourself in the picture, place the camera on a tripod or stable surface, then press the Shutter button all the way down. The camera locks focus and exposure just before the end of the countdown, allowing you time to place yourself in the scene.

The Self-Timersetting resets to Off after the image is taken.

Using the Burst setting

Burst allows you to take up to two (M440 series) or three (M630/M540 series) pictures as quickly as possible when you press and hold the Shutter button all the way down.

1.While in the Picture Capture Menu, use to highlight Burst , press

, highlight On, press , then hold down until the menu disappears.

2.Frame the subject, then press the Shutter button halfway down to lock the focus and exposure. Then press the Shutter button all the way down and hold it. The camera takes up to two or three pictures (depending on your camera model) as quickly as possible until you release the Shutter button or the camera runs out of memory.

The Image Display remains off during the burst capture. After the burst images have been taken, each image appears one at a time in Instant Review (see “Instant Review”

on page 9). You can delete the entire burst sequence in Instant Review. To delete individual images, see “Deleting images” on page 18.

The Burst setting remains in effect until it is changed again, or until it resets to the default Off setting when you turn off the camera.

16 Setting options for taking pictures and recording video clips