Watching Two Pictures
SPress the green/PIP button on the remote control one or more times to cycle through these options:
• Overlapping pictures (PIP)
•
•No second picture
When two pictures are shown, you can control their configuration. The “active picture” is the one with sound and that sometimes has a border.
To do this... | Press... |
|
|
Find the active picture | or when no border is visible |
|
|
Change the size of the active picture | or |
|
|
Move the border to the other picture and play its sound | or |
|
|
Swap picture positions | OK |
|
|
Move an overlapping picture (PIP) | Settings, then go to Source > Dual picture > Layout |
|
|
Show a different source | Source |
|
|
Show only the active picture (end two pictures) | Green/PIP |
|
|
NOTE: One of the pictures must be the antenna or cable source. However, you cannot view the antenna and cable sources at the same time.
Turning Off after a Delay
You can set the TV to play for up to two hours and then automatically turn off.
•To set the sleep timer, press the blue/SLEEP button one or more times to select the delay, and then press OK.
•To view the timer, press the blue/SLEEP button once.
Watching a Show 45
