1.Rotate the elevator foot to balance the projector.
2.Connect one end of the projector signal cable ➊B to the projector and the other end to the VGA connector on the desktop computer and tighten the screws.
✎
✎
If your computer has a digital connector, connect one end of the DVI signal cable ➊A to the digital connector on the projector and the other end to the digital connector on the computer.
Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector.
3.Connect one end of the power cord ➋ into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. The projector will automatically be placed into Standby mode.
Getting Started | 10 |