4.Use a coin to loosen the screw ➌ on the lamp module.
5.On the front of the lamp module, slide up the release latch ➍ to disengage it from the projector base.
6.Pull out the lamp module .
!WARNING: To reduce the risk of personal injury, do not drop the lamp module or touch the glass bulb. The glass may shatter and cause an injury if it is dropped.
Reverse the previous steps to replace the lamp module.
✎After replacing the lamp module, remember to reset the lamp hours in the
CAUTION: The lamp contains < 0.125 percent mercury by weight. If the projection lamp breaks, the mercury may be released into the atmosphere. Please follow applicable federal, state, and local regulations for disposal and/or recycling.
Care and Maintenance | 48 |