■S-video, Use Source to Change Input—IndicatesS-video with other inputs are active. Press the Source button to change the setting.

■HDTV, Use Source to Change Input—Indicates HDTV input is connected along with other inputs. If HDTV is connected, HDTV is the default setting. Press the Source button to switch to video.

HDTV (Optional Use)

The Compaq Microportable Projector is capable of displaying various High Definition TV display modes. The Multimedia Adapter is not required to take advantage of this functionality.

A variety of sources can be used to provide HDTV data to the projector for display. Some of these sources are:

■Digital-VHS (D-VHS) player

■HDTV-DVD player

■Satellite Dish HDTV receiver

■A variety of DTV tuners (to receive programming over the airwaves)

Most of these sources will provide an analog component video output, a standard VGA output, or a standard digital DVI output. The color information can be either in YPrPb (default) format or RGB format. The user can switch between these using the analog on-screen menu adjustments by selecting “HDTV Setup.” Refer to “Analog On-Screen Menu Adjustments” earlier in this chapter for more information.

The projector is capable of processing HDTV data provided either on the standard VGA connector or the DVI interface. Use the Component HDTV to VGA cable that came with your projector to convert component outputs to VGA format.

The following modes are supported on the DVI interface:

■HD0

■640 x 480p

■704 x 480p

■1280 x 720p

■HD1

■1920 x 1080i

Using the Projector

30