2-2Compaq NC3120 Fast Ethernet Server Adapter User Guide

Installing the Adapter in a Server

Refer to the documentation provided with your server for the specific steps necessary to safely install a PCI card in your server.

Figure 2-1. Installing the adapter in a server

1.If the server is not PCI Hot Plug compliant, power down the server and unplug the power cord.

2.Remove the server cover and the cover bracket from a PCI slot.

WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them.

CAUTION: If the device is not PCI Hot Plug compliant, power down the device and unplug the power cord rom the power outlet before removing the device cover. Failure to do so may damage the adapter or computer.

3.Firmly seat the adapter in a PCI slot and secure the adapter bracket.

4.Replace the server cover and plug in the power cord.