3.Remove the mSATA SSD (2) by pulling the drive away from the slot at an angle.
Reverse this procedure to install the mSATA SSD.
WLAN module
Description | Spare part number |
|
|
Broadcom BCM 4352 802.11 ac 2×2 WiFi + Bluetooth 4.0 Combo Adapter (for use on computer | |
models with an Intel processor, select models only) |
|
|
|
Intel Dual Band | |
on computer models with an Intel processor, select models only) |
|
|
|
Intel Dual Band Wireless 7260 802.11 bgn 2×2 WiFi + Bluetooth 4.0 Combo Adapter (for use on | |
computer models with an Intel processor) |
|
|
|
Qualcomm Atheros AR9485 802.11bgn 1×1 WiFi Adapter (select models only) | |
|
|
Qualcomm QCA9565 802.11bgn 1×1 WiFi + Bluetooth 4.0 Combo Adapter (select models only) | |
|
|
Ralink RT3290LE 802.11bgn 1×1 WiFi + Bluetooth 4.0 Combo Adapter (select models only) | |
|
|
Realtek RTL8188EE 802.11bgn 1×1 WiFi Adapter (select models only) | |
|
|
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
44 Chapter 5 Removal and replacement procedures for Customer
