Removal and Replacement Procedures

❏Display assembly (Section 5.16)

❏Top cover (Section 5.17)

❏Speaker assembly cable (Section 5.19)

❏LED board (Section 5.20)

❏Bottom board (Section 5.21)

❏Any Secure Digital (SD) cards in the SD Card slots

2.Remove the six PM2.5×5.0 screws 1 that secure the system board to the notebook.

3.Remove the PM2.5x11.5 screw 2 that secures the hard drive connector to the system board.

4.Use a 5.0-mm socket to remove the two HM5.0×9.0 standoffs 3 that secure the system board to the notebook.

Removing the System Board Screws and Standoffs

Maintenance and Service Guide

5–53