Connecting the Cables

1.Place the monitor in a convenient, well-ventilated location near the computer.

2.Remove the cable management clip from the stand by pulling back on the two sides of the clip.

3.Connect a VGA signal cable or DVI-D signal cable.

NOTE: The monitor is capable of supporting either analog or digital input. The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the +/source button on the front panel or through the On-Screen Display (OSD) feature by pressing the Menu button.

●For analog operation, use the VGA signal cable provided. Connect the VGA signal cable to the VGA connector on the rear of the monitor and the other end to the VGA connector on the computer.

Connecting the Cables

5