![](/images/new-backgrounds/1179666/17966629x1.webp)
Figure 8.6.7 SNMP Function
Figure 8.6.9 DHCP and manual IP configuration
8.6Input Parameters Through the Client Manager
1.Click the "Management" to open the next page.
2.Click the "Time Settings" menu on the left (menu section) to set the current time. Click Set.
3.Click the "LAN Setup" menu on the left; then click the "Wireless" menu.
4.Enter appropriate
■ Note:
5.Select WEP Enable box. Enter appropriate WEP key on line 1. Click Set. Click Set again.
6.Click the "Network Setup" menu on the left.
7.If you want to use the Agent Function, check "On" and input the
8.If the
9.On the LAN Port page, you may opt to obtain the IP address from the DHCP server or enter a static IP address manually for the access point. If you are given a default gateway IP from your ISP, input that address. If it is not given to you, leave the box empty. Click Set.
8.7Input Parameters Through a Wired PC,Terminal Software
1.Use the serial cable provided to connect the
2.Start the Hyper Terminal software included in the Windows OS. Hyper Terminal is a standard software in Windows but it is
10