Buffalo Technology WLM2-G54 manual List of the Wireless PCs, Authorized Wireless LAN PCs

9.9.2 List of the Wireless PCs

Displays the PCs that are communicating with the WLM2-G54. Check the "registration" box and click the "change" button to add a MAC address.

9.9.3 Authorized Wireless LAN PCs

Displays all MAC addresses that are allowed to communicate with the WLM2-G54. The status shows the current active MAC addresses on the network. To eliminate a specific MAC address from the network, check the "delete" box and click the "change" button.

■Note: If configuring from a wireless PC, add your MAC address to the list of authorized wireless LAN PCs (MAC restrict screen).

9.10 Wireless

Wireless communication parameters and how to use them under the "IEEE802.11g" page. (see next page)

9.10.1 Add Peer AirStation (MAC Address)

The wireless LAN MAC addresses of all AirStations that will be communicating with each other have to be registered in each AirStation. Up to 6 AirStations can be registered in one AP. Input the MAC address in the two-digit format (00:40:26:00:11:22). Click "add" to register the MAC address. The added MAC address is checked in the "wireless MAC address" under the Diagnostic screen, on the Device Information page.

1.Open the Configuration Screen of the primary WLM2-G54, and go to the LAN Settings screen

2.The User Name should be "root", and there is no password unless you have set one up on a previous configuration session.

3.Click on the WDS link at the bottom left side of the screen.

Figure 9.8 RADIUS

Figure 9.9.1 Manual Setting

17