Manager or Terminal Software setup screen.
4.When login prompt appears, enter “root” as a default login name.
5.Input "?"/press "Enter" to view list of commands.
PART III
9.0Detailed Configurations
9.1Introduction III
Although your AirStation will work fine in most network environments, you may wish to explore the advanced options. This chapter explains each parameter in the setup screen.
9.2Basic Settings
Basic Settings includes the following parameters:
AirStation Name
Connection type
Figure 9.3 Time Settings
IP address
Default Gateway
DNS Server
9.2.1 AirStation Name
A unique name can be set for your AirStation in order for clients to recognize it. It identifies each access point when multiple access points are present. Although it is not necessary to set this parameter, it can be useful. Once it is set, the name will be shown at the top of the initial setup screen.
9.2.2 Connection type
The following options are possible for the wired LAN port setting:
10 Mbps Half Duplex
100 Mbps Half Duplex
Auto
If the port on the LAN hub is set to Full Duplex, set the
9.2.3 IP Address
If you do not use a DHCP server on your network, you have to assign an IP address manually. A specific IP address should be obtained for this. You can use DHCP by selecting "auto IP assignment from DHCP Server."
9.2.4 Default Gateway
A default gateway IP should be assigned to the AirStation. If the gateway IP is unknown, leave the box blank. If "Auto IP assignment from DHCP Server" is selected, the gateway IP will be assigned automatically.
9.2.5 DNS Server
Input the IP address of the server to be used by the
12
