Problem

Possible Cause and Recommended Action

 

 

A recorded image

1)Camera power may have been turned off before the save

 

was not saved.

 

operation was complete, which will result in the image not

 

 

 

being saved. If the battery indicator shows

, charge the

 

 

 

battery as soon as possible (page 17).

 

 

 

2)You may have removed the memory card from the camera

 

 

 

before the save operation was complete, which will result in

 

 

 

the image not being saved. Do not remove the memory card

 

 

 

before the save operation is complete.

 

 

 

 

 

 

 

 

Though available

Not enough light is reaching the subjects. Change the flash

 

lighting is bright,

mode setting to

 

(Forced On) for daylight synchro flash

 

 

 

the faces of people

(page 35), or adjust

EV Compensation to the + side (page 57).

 

in the image are

 

 

 

 

 

 

 

dark.

 

 

 

 

 

 

 

 

 

 

 

 

 

Subjects are too

Sunlight reflected by water, sand, or snow, can cause

 

dark when shooting

underexposure of images. Change the flash mode setting to

 

images in a

 

 

(Forced On) for daylight synchro flash (page 35), or adjust

 

 

 

 

seashore or ski

 

EV

Compensation to the + side (page 57).

 

 

area.

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital zoom

Time stamping may be turned on, which will cause digital zoom

 

(including HD

to be disabled. Turn off time stamping (page 82).

 

 

zoom) does not

 

 

 

 

 

 

 

work. The zoom

 

 

 

 

 

 

 

bar indicates zoom

 

 

 

 

 

 

 

only up to a zoom

 

 

 

 

 

 

 

factor of 12.5.

 

 

 

 

 

 

 

 

 

 

 

 

 

The image is out of

1)Focusing may not be possible because the subject is outside

 

focus during movie

 

the focus range. Shoot within the allowable range.

 

recording.

2)The lens may be dirty. Clean the lens (page 92).

 

 

 

 

 

 

 

 

104