3. Turn on the camera.

The camera’s back lamp will light green at this time. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the camera’s built-in memory if it does not have a memory card loaded) as a drive. The appearance of the drive icon depends on the Mac OS version you are using.

•The first time you connect the camera to your Macintosh with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.

•Charging continues even if the camera is turned on (page 16).

4.Double-click the camera’s drive icon.5.Drag the “DCIM” folder to the folder to which you want to copy it.6.After the copy operation is complete, drag the drive icon to Trash.

7.On the camera, press [ON/OFF] (Power) to turn off the camera. After making sure that the green back lamp is unlit, disconnect the camera from the computer.

•To view copied images1. Double-click the camera’s drive icon.2. Double-click the “DCIM” folder to open it.3. Double-click the folder that contains the images you want to view.4. Double-click the image file you want to view.

An image that was rotated on the camera will be displayed on your Macintosh screen in its original (unrotated) orientation.

Never use your computer to modify, delete, move, or rename any image files that are in the camera’s built-in memory or on its memory card.

Doing so can cause problems with the camera’s image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity. Whenever you want to modify, delete, move, or rename an image, do so only on images that are stored on your computer.

IMPORTANT!

•Never unplug the USB cable, or operate the camera while viewing or storing images. Doing so can cause data to become corrupted.

78