Adding Audio to a Snapshot (Voice Memo)

Procedure

[ ] (PLAY) Snapshot Screen [SET] MENU PLAY Tab Voice Memo

You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s audio whenever you want. You can record up to about 30 seconds of audio for a single snapshot.

1. Press [SET] to start audio recording.

 

Remaining recording time

2. Press [SET] again to stop audio recording.

 

• Take care that you do not block the camera’s microphone

 

 

with your fingers while recording.

 

•

Good recording results are not possible when the camera is

 

 

too far away from what you are trying to record.

 

•

Your camera supports the following audio data formats.

Microphone

– Audio Format: WAV extension

•You cannot add audio to an image that is protected.

•To delete audio, perform the following operation: Voice Memo Delete [SET] [] (Delete).

IMPORTANT!

•Note that you cannot restore the original audio of an Audio Snapshot after you delete or re-record it.

To play snapshot audio

1. In the PLAY mode, use [] and [] to scroll through the images until the Audio Snapshot you want is displayed.

An audio snapshot is one that has a icon.

2. Press [ ] (Movie) to start playback.

68