![](/images/new-backgrounds/1213037/21303769x1.webp)
ZR2440w Model
The default input on the ZR2440w is DisplayPort and the scan order is initially set to DisplayPort,
+button on the front of the monitor will take you directly to the OSD
Control |
| Function | |
|
|
|
|
1 |
| Menu | Opens, selects or exits the OSD menu. |
|
|
|
|
2 |
| Minus | If the OSD menu is on, press to navigate backward through |
|
|
| the OSD menu and decrease adjustment levels. |
|
|
|
|
3 |
| Plus/source | If the OSD menu is on, press to navigate forward through |
|
|
| the OSD menu and increase adjustment levels. |
|
|
| If the OSD menu is inactive, press to activate the source |
|
|
| button that chooses the video signal input (VGA, DVI, or |
|
|
| DisplayPort). |
|
|
|
|
4 | OK | OK | If the OSD menu is on, press to select the highlighted menu |
|
|
| item. |
|
|
|
|
5 |
| Power | Turns the monitor on or off as long as the master power |
|
|
| switch on the rear panel is on. |
|
|
|
|
6 |
| Power LED | Blue = Fully powered. |
|
|
| Amber = Sleep mode. |
|
|
| Flashing Amber = Sleep Timer mode. |
No light indicates power off, or normal operation if the LED is suppressed.
ENWW | Overview of Operation 27 |