HP PL4245N manual Identifying Your Component’s Cables, Video

4Press down the tab for the speaker connector, insert the speaker wire and release the tab to secure the wire:

•Connect the right speaker red (positive +) wire to the right red (+) connector.

•Connect the right speaker black (negative –) wire to right black (–) connector.

•Connect the left speaker red (positive +) wire to the left red (+) connector.

•Connect the left speaker black (negative –) wire to left black (–) connector.

Identifying Your Component’s Cables

Where you connect your component into the connectors depends on the type of component and cables you are using. Your TV is compatible with composite, component, S-video, DVI-D, or VGA cables. Use the following chart to determine your component type:

Type of	Description of Cable(s)	Where to Connect
Component
Composite	One three headed cable:	• Insert the yellow cable into the
	• One yellow for video	yellow AV video in.
		• Insert the red and white cables into
	• One red for audio
		the red and white audio inputs.
	• One white for audio
S-video	One cable with 4 pins.	Insert the cable into the S-video in.
Component	Three or five headed cable:	• Insert the red cable into the red
	• One red for Pr signal	YPbPr video in.
	• One green for Y signal	• Insert the green cable into the
		green YPbPr video in.
	• One blue for Pb signal
		• Insert the blue cable into the blue
	Some component cables come with red and
		YPbPr video in.
	white audio cables attached.
		• Insert the red and white audio
		cables into the red and white
		YPbPr audio inputs.
DVI-HDCP	One cable with 3 rows of 8 pins.	Insert the cable into the DVI video
		input.
VGA	One cable with 3 rows of 5 pins.	Insert the cable into the VGA video
		input.

14Setup