To re-assign other device keys, repeat steps 1 through 4 by substituting the key sequence from the following table for the most popular components:

To assign

Use this sequence

 

 

TV as 2nd DVD/VCR button

SETUP - 9 - 9 - 2 — DVD/VCR - TV

 

 

TV as 2nd CBL/SAT button

SETUP - 9 - 9 - 2 — CBL/SAT - TV

 

 

TV back to TV

SETUP - 9 - 9 - 2 — TV - TV

 

 

 

VCR as 2nd CBL/SAT button

SETUP - 9 - 9 - 2

— CBL/SAT - VCR

 

 

 

VCR back to VCR

SETUP - 9 - 9 - 2

— VCR - VCR

 

 

 

CBL/SAT as 2nd VCR button

SETUP - 9 - 9 - 2

— VCR - CBL/SAT

 

 

 

CBL/SAT back to CBL/SAT

SETUP - 9 - 9 - 2

— CBL/SAT - CBL/SAT

 

 

 

When a re-assignment is done, the red light blinks twice to confirm your choice. Then, you need to program the remote control to control the new component; see “Programming the component code“ on page 33.

Changing volume lock

The remote control is set to control volume of a component through your TV while in the TV, DVD/VCR, or CBL/SAT mode. However, in the HP.PC mode you have separate control of the volume.

If you want the volume to be controlled by a different component than the TV, you can change the Volume Lock setting to control volume through a non-associated mode (e.g., through the cable in the TV mode).

To change volume lock to another mode:

1On the remote control, press and hold SETUP until the red light blinks twice, then release SETUP.

2Press the number buttons 9, 9, 3, and then press any mode key once (except TV). The red light will blink twice.

3Now, whenever you press VOL+, VOL–, or MUTE, volume is controlled by your component mode choice.

To change volume lock back to the TV mode:

1On the remote control, press and hold SETUP until the red light blinks twice, then release SETUP.

2Press the number buttons 9, 9, 3, and then press TV. The red light blinks twice.

3Now, whenever you press VOL+, VOL–, or MUTE on the remote control, volume is controlled by your TV.

Using the TV 35