Searching for the component code
If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code:
1On the remote control, press CBL/SAT button or DVD/VCR button once.
2Press and hold SETUP until the red light blinks twice, then release SETUP.
3Press the number buttons 9, 9,1. The red light blinks twice.
4Aim the remote control at the
NOTE: In the search mode, the remote control sends codes from its library to the selected device, starting with the most popular code first.
5Press SETUP once to lock in the code.
Checking the component code
If you have set up the remote control to use a component, you may need to find out which
1On the remote control, press CBL/SAT or DVD/VCR once.
2Press and hold SETUP until the red light blinks twice, then release SETUP.
3Press the number buttons 9, 9,1. The red light blinks twice.
4For the first digit of the code, press the number button 1 once. Wait 3 seconds, and then count the number of times the red light blinks and write down the number.
NOTE: When you count three blinks, it means the code digit is 3. When a code digit is 0, the red light will not blink.
5Repeat step 4 for the three remaining digits of the code, pressing 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.
Reassigning component buttons
The remote control can be set up to control a second TV or VCR, or any combination of eight home entertainment components.
For example, to control a TV, a Cable Converter, and two VCRs, you need to
1On the remote control, press and hold SETUP until the red light blinks twice, then release SETUP.
2Press the number buttons 9, 9,1. The red light blinks twice.
3Press DVD/VCR once, then press CBL/SAT once.
4The CBL/SAT button is now ready to be programmed for your second VCR. See “Programming the component code“ on page 33.
34Using the TV