QuickSpecs
HP COMPAQ PRO 6300
Technical Specifications – Hard Disk and Solid State Storage
HP 120-GB Solid State Drive
Unformatted Capacity | 120 GB |
Architecture | Multi Level Cell (MLC) NAND Flash with wear leveling 10 channel controller |
Interface | Serial ATA 2.0 (3.0 Gb/s) |
Dimensions (W x H x D) | 2.74 x 0.37 x 4 in/6.98 x 0.95 x 10.2 cm |
Weight | 0.18 lb/80 g |
| Sustained Sequential Read: Up to 250 MB/s | ||
Bandwidth Performance | Sustained Sequential Write: Up to 70 MB/s | ||
Random Read: Up to 35K IOPs | |||
| |||
| Random Write: Up to 6.6K IOPs | ||
Latency | Read: | ||
Write: | |||
| |||
Power | DC power requirement: | 5 VDC | |
Total power consumption: | 0.15W (active); 0.075W (idle) | ||
| |||
Useful Drive Life | 35TB written, up to 20GB/day for 5 years | ||
| Operating Temperature: 32° to 158° F (0° to 70° C) | ||
Environmental | Relative Humidity: | 5% to 95% | |
Maximum Wet Bulb |
| ||
(all conditions, | 84° F (29° C) | ||
Temperature (operating): | |||
| |||
| Shock: | 1,500 |
HP 128 GB Solid State Drive
Unformatted Capacity | 128 GB* |
|
Architecture | Multi Level Cell (MLC) NAND |
|
Interface | SATA 6 GB/sec |
|
Dimensions (W x H x D) | 2.75 x 0.276 x 3.96 in (6.985 x 0.7 x 10.05 cm) |
|
Weight | 0.16 lb (73 g) |
|
| Sustained Sequential Read: Up to 450 MB/s |
|
Bandwidth Performance | Sustained Sequential Write: Up to 260 MB/s |
|
Random Read: up to 46K IOPs |
| |
|
| |
| Random Write: up to 56K IOPs |
|
Latency | Read: 55ms (TYP) |
|
Write: 55ms (TYP) |
| |
|
| |
Power | DC power requirement: Min 4.5 V; Max 5.5 V |
|
Total power consumption: 160 mW (Active) ; <85 mW; (Idle) |
| |
|
| |
Useful Drive Life | 1.2 million device hours** |
|
| Operating Temperature: 32° to 158° F (0° to 70° C) |
|
Environmental | Relative Humidity: 5% to 95% |
|
|
| |
|
|
|
| DA - 14351 North America — Version 35 — November 21, 2013 | Page 29 |