2.Make sure the work table opens and closes smoothly.
3.Reach under the work table and fully extend the two support legs.
4.Lock the latches on the bottom of each cur- tain into the work table.
Filters
To install the filters:
1.Install the six third stage filters into the filter case as shown in Figure 12.
| Filter | |
Third Stage | Case | |
| ||
Filters |
| |
Inner | Middle | |
Brace | ||
Rail | ||
| ||
| Outer | |
| Rail |
Figure 12. Third stage filters (only three shown).
2.Install six second-stage filters above and below the middle brace along the inner rails, as shown in Figure 13.
Figure 13. Second-stage filters.
3.Install six first stage filters (Figure 14) along the outer rails.
Figure 14. First stage filters.
Ducting
The G0533 dry spray booth must be vented to the outside of your shop or building using 12" metal spiral wound ducting or 18 gauge rolled galvanized steel ducts in accordance with NFPA 33 guidelines.
Model G0533 (Mfg. Since 3/11)
