SECTION 4: OPERATIONS
Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving machinery.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training, neglect or misuse.
Filter Indicator
NOTICE: Never operate the spray booth without all of the air filters installed!
To fill the air filter indicator (manometer):
1.Turn the spray booth OFF!
2.Disconnect the power!
3.Check to make sure the manometer body is level. Adjust as needed.
4.Rotate the zero adjustment knob counter- clockwise (Figure 18) until it stops, then turn it clockwise three turns.
Plug
Zero Adjustment Knob
Figure 18. Air filter indicator controls.
5.Remove the plug (Figure 18) and fill the chamber with the included red gauge oil until the fluid level reaches zero on the indicator. Minor fluid level adjustments can be made using the zero adjustment knob.
Note: Only use Dwyer® red gauge oil to fill the manometer. If you need additional oil, order Grizzly part number P0533062.
Model G0533 (Mfg. Since 3/11) |
