Air Filter Indicator
To install the air filter indicator:
1.Mount the manometer to the side of the spray booth by threading the M4 x 45 tap screws into the
Level
Figure 15. Mounting manometer to spray booth.
2.Adjust the manometer so the built-in level reads level (Figure 15).
3.Install a tubing connector fitting in the larger pre-drilled hole on the side of the booth near the manometer as shown in Figure 16.
Model G0533 (Mfg. Since 3/11)
Tubing
Connector
Fitting
Figure 16. Tubing installed onto spray booth
chamber.
4.Run tubing from the low pressure side (-) of the manometer to the tubing connector fitting as shown in Figure 16.
5.Install tubing into the high pressure side (+) of the manometer and secure it with the plastic clip and an M4 x 12 tap screw as shown in
Figure 17.
