6.With new filters installed, turn the spray booth ON, observe the rise in the reading, and mark with the supplied green arrow as shown in the example in Figure 19.
New Filter
Indicator
Mark
Figure 19. New filter installation mark example.
Model G0533 (Mfg. Since 3/11)
7.Multiply the reading from Step 6 times 2 (2x) and mark with the supplied red arrow (Figure 20). This is the dirty filter indicator mark. When the fluid reaches the red arrow, install new filters.
Dirty Filter
Indicator
Mark
Figure 20. Dirty filter mark example.
Note: Always make sure the fluid level is at zero before using the spray booth each time. Also, check the fluid level on a regular basis and
