Wall Mounting: Install two 5/8-inch (15.875 mm) Number

 

12 wood screws, (included) into the mounting surface,

 

positioned 6.3 inches (160 mm) apart. Use the wall anchors

 

if necessary. Then, position the switch over the screws and

 

slide to lock in place.

3

 

Important: For wall-mounting, the network ports must be

2

1

facing up or down. (See “Installation Precautions” on

 

page 6.)

 

1

2

Under-Surface Mounting: Install the two screws on the

 

surface bottom similarly to the procedures for wall

 

mounting. Then, position the switch over the screws and

 

slide to lock in place. Install the third screw at the side of

 

the switch to prevent it from sliding out of the locked

 

position, if necessary.

1

 

 

1

32

2