Using the Fingerprint Reader

Logon Using a Password

You must enter the alphanumeric password you entered during setup.

1.Turn on your iPAQ Pocket PC.

2.Enter your password.

3.Tap OK or ENTR.

Logon Using a PIN or Fingerprint

You must enter a PIN or swipe the fingerprint you entered during setup. iPAQ Fingerprint Reader remembers your logon preference.

The next time you logon, the PIN or Fingerprint window corresponding to your last logon will be displayed.

1.Turn on your iPAQ Pocket PC.

2.Enter your 4-digit PIN or tap the Fingerprint tab to swipe your enrolled finger.

If your fingerprint was of poor quality, iPAQ Fingerprint Reader will ask you to swipe it again. If the quality was good, but there was not a match, the message “No match” will be displayed.

Logon Using a PIN and Fingerprint

You must enter both a PIN and swipe the fingerprint you entered during setup.

1.Turn on your iPAQ Pocket PC.

2.Enter your 4-digit PIN.

3.Swipe your enrolled finger.

5–18

Reference Guide

Page 156
Image 156
HP QuickSpecs h5400 manual Logon Using a Password, Logon Using a PIN or Fingerprint, Logon Using a PIN and Fingerprint