HP Scitex FB910 manual Foot switch connection, Facility air connection A, Lift points for forklift

Models: Scitex FB910

1 12

Page 11

6.Disconnect the foot switch.

7.Disconnect the printer from the facility pneumatic air supply or compressor, as equipped.

8.Use the forklift to elevate the printer off of the leveling pads. Lift only at the designated points indicated on the printer chassis.

Image 11

Contents

Preparing the printer for transport HP Scitex FB910 PrinterPart number TN2808 Revision A 2012 Hewlett-Packard Development Company, L.PFigure 1 Printer orientation 1 Overview1.2 Printer orientation 1.3 Printhead orientationFigure 4 Waste ink collection bottle, HP Part number CH154-67014 2 Printhead preparation2.1 Required tools and materials Figure 3 Squeeze bottle for flush, HP Part Number CH154-67015Figure 5 Carriage cover fastener locations 2.2 ProcedureFigure 8 Filling the printhead with flush 3.1 Required tools and materials 3.2 ProcedureFigure 9 Idler assembly and fastener 3 Carriage preparation12. Place several lint-free cloths on the Saran Wrap/pad 11. Place another piece of Saran Wrap on top of the foam pad4 Chassis preparation 4.2 ProcedureFigure 10 Service-end cable connections Figure 11 Service-end grounding strap user end similarFigure 13 Foam blocks underneath the media hold-down rollers Figure 14 N-up alignment pinsFigure 12 User-end cable connections to chassis Designated Lift Points Figure 15 Foot switch connectionFigure 16 Facility air connection A Figure 17 Lift points for forkliftFigure 18 Wheel attachment