HP Scitex FB910 manual Procedure, Carriage cover fastener locations

2.2Procedure

1.From the printer’s control panel, select “Tools Maintenance Printheads Procedures Empty Heads (Fill with Air)”. Follow the on-screen prompts for the procedure. The procedure uses air pressure to empty the ink from the heads. The ink drains into the service station tray located at the user end of the printer.

2.Repeat step one until no more ink can be seen exiting the printheads.

3.Remove the carriage cover for access to the printheads.

Figure 5 Carriage cover fastener locations

4.Wear protective gloves, such as latex, to protect your hands from being stained with ink.

5.Locate the left-slave printhead for each color channel. The left slave printhead has the air tube connection as shown in Figure 6.

Figure 6 Air tubes (indicated by arrows) connecting to left-slave printheads

6.Remove the air tube from the left-slave printhead.

5