Chapter 3 | Installing Microsoft Windows NT 4.0 Server |
oHP Server tc2110 Windows NT SCSI driver (HP disk NT SCSI)
oHP Server tc2110 Windows NT LAN driver (HP disk NT LAN #1 and #2)
NOTE | If the Windows PC does not |
| by opening Startup.htm found at the root level of the Startup |
| CD. |
|
|
Section 2. Create Microsoft Windows NT Installation Diskettes
Three installation diskettes are required to install Microsoft Windows NT 4.0 on your server. Follow these steps to create these installation diskettes:
1.Locate three blank, formatted 3.5" diskettes.
2.Insert your Microsoft Windows NT 4.0
3.From a DOS prompt, type:
C:\D:\i386\winnt32 /ox
(where D is the drive letter for the
4.Follow the prompt and insert the diskettes in the order described.
Section 3. Perform Windows NT Installation
The installation of Windows NT contains several phases:
Phase 1 – Driver(s) Installation
Phase 2 – Hard Drive Preparation
Phase 3 – System Configuration Details
Phase 4 – Configuring the Network
Phase 5 – Completing the Installation
Phase 6 – Install the Service Pack
Phase 7 – Install the HP Video Driver
6