Chapter 6

Installing Novell NetWare 6.0 and Novell Small Business Suite 6.0

2.Insert your HP Startup CD in a Windows PC and follow the on-screen instructions to create the HP Server tc2110 NetWare SCSI drivers (HP disk NW SCSI).

NOTE

If the Windows PC does not auto-start the Startup menu, start it

 

by opening Startup.htm found at the root level of the Startup

 

CD.

 

 

Section 3. Perform NetWare 6.0 or SBS 6.0 Installation

The installation of NetWare 6.0 or SBS 6.0 contains several phases:

￿￿Phase 1 – Start the Installation

￿￿Phase 2 – Install HP Drivers

￿￿Phase 3 – Configure the Network

PHASE 1 – Start the Installation

 

NOTE

If your hard drive contains data or is not new, HP recommends

 

 

to use a utility such as fdisk to erase all data and partitions

 

 

from your hard drive.

 

 

 

For NetWare 6.0

 

 

 

 

 

NOTE

The NetWare NOS installation contains a known software

 

 

error (not product-specific) that does not allow you to boot

 

 

from CD-ROM. To work around this problem, boot from a

 

 

DOS diskette and create a bootable DOS partition on the drive.

 

 

 

1.Insert the Novell NetWare 6.0 or SBS 6.0 CD-ROM and boot the system.

2.Press Enter to read the license agreement then press Esc, and select "Accept License Agreement".

3.Press Enter to "Create a New Boot Partition".

4.HP recommends to modify “Size of boot partition” to create a 1000MB boot partition.

46