HP SG3245IN, SG3140IL manual Installing an Add-in Card

Installing an Add-in Card

1If necessary, remove the slot cover, or insert a flat screwdriver into the knockout plate slot (A) and rotate the screwdriver to break the knockout plate.

A

2Align the edge of the add-in card with the slot on the chassis and gently but firmly press the card straight down into the add-in card slot. The whole connector should be seated properly in the card slot.

3On the back of the PC, replace the bracket cover for the add-in card slots, and then install the screw.

Upgrading and Servicing Guide 27