Adding or Replacing the Memory Card Reader
1Complete the procedures to remove the memory card reader, if necessary. See “Removing the Memory Card Reader” on page 15.
2Slide the memory card reader part way into the front of the chassis.
3Attach the cable to the back of the memory card reader.
4Push the memory card reader into the chassis until the screw hole on the chassis is aligned with the screw hole on the right side of the memory card reader, and then insert the screw to secure the memory card reader to the chassis. If necessary, slide the memory card reader to the right to align the screw hole.
5Complete the procedures to replace the front panel, replace the side panel, and close the PC. See “Opening and Closing the PC” on page 1.
