HP SG3778D manual Upgrading and Servicing Guide

3Gently lay the chassis on its side.

4Inside the computer, locate the add-in card slots on the motherboard.

WARNING: Beware of the sharp edges on the add-in card slot cover.

5Move any cabling out of the way, if this is necessary to reach the add-in cards.

6Hold the card at each end, carefully rock it back and forth until the connectors pull free from the socket, and then lift the card from the chassis.

NOTE: Be sure not to scrape the add-in card against the other components. Store the old add-in card in the antistatic packaging that contained the new card.

7If you are not replacing the old add-in card with a new add-in card, insert the metal slot cover into the open card slot.

Upgrading and Servicing Guide 21