HP Smart Array P411 8-port SAS RAID Controller 572531-B21 manual Technical Specifications

QuickSpecs

HP Smart Array P411 Controller

Technical Specifications

Dimensions (excluding	Low Profile PCIe Form Factor
bracket)	19.05 cm x 24.13 cm x 5.72 cm (7.5 in x 9.5 in x 2.25 in)
Disk Drive and Enclosure	6Gb/s SAS (Serial Attached SCSI)
Protocol Support -	3Gb/s SATA (Serial AT Attachment)
Transfer rate
SAS Connectors	2 external (Mini SAS) x8 wide port connectors
Data Transfer Method	x8 5G PCIe 2.0 Express (4 GB/s maximum bandwidth)
Memory Bus Speed	DDR2-800 MHz with 40 bit or 72-bit wide bus provides up to 4.2 GB/s maximum bandwidth
PCI	PCIe Express Gen 2.0
Simultaneous Drive	2 x4 Wide SAS Ports
Transfer Ports
SAS Port Link Rate	24 Gb/s per x4 wide port connector (4 x 6 Gb/s)
Software upgradeable	Yes
Firmware
Cache Memory	40-bit 256MB ECC protected cache (72-bit 512MB BBWC or 72-bit 512MB and 1G FBWC module upgrades
	available); transportable with battery-backed or flash upgrade
Logical Drives Supported	Up to 64 logical drives
Memory Addressing	64-bit, supporting servers memory space greater than 4 GB
RAID Support	RAID 6, 6+0 (Advanced Data Guarding)
	NOTE: RAID 6, 6+0 can be enabled with either
	Minimum of 256 MB cache with Battery kit or FBWC and Smart Array Advanced Pack License key
	option upgrades
	Minimum of 512 MB BBWC or FBWC and Smart Array Advanced Pack License key option upgrades
	RAID 5, 5+0 (Distributed Data Guarding)
	NOTE: A minimum of 256 MB cache is required to enable RAID 5, 5+0 support of the Smart Array P411
	RAID 1+0 (Striping & Mirroring)
	RAID 0 (Striping)
Upgradeable Firmware	Upgradeable Firmware with Recovery ROM feature

DA - 13202 Worldwide — Version 25 — November 1, 2013 Page 17