HP SR5448F, SR5558D, SR5470AN, SR5450F, SR5421F, SR5559D Advanced Setup Guide features vary by model

3Connect the rear speaker cable to the black connector that matches the back of your computer.

3 6 S

For type 3-connector systems, the blue Audio Line In connector functions as a Rear Line Out when a multichannel audio configuration is activated.

4Connect the cables to the audio system.

5Connect the front and rear speakers to the subwoofer. Refer to the speaker documentation.

6Turn on the computer.

NOTE: Always turn on the computer before you turn on the speaker system.

7Plug in the speaker system power.

8Turn on the speaker system.

9After the speakers are connected to the computer, configure the audio software for sound output for your computer model. See “Configuring Speaker and Sound Options” in the Getting Started guide.

￿Type 3: See “Configuring speakers with Realtek HD Audio Manager” in the Getting Started guide.

￿Type 6: See “Configuring speakers with Realtek HD Audio Manager” in the Getting Started guide.

￿Type S (audio card): See “Using the Creative Sound Blaster X-Fi or X-Fi Fatality audio card” in the Getting Started guide.

The following diagram shows a typical 4.1 audio installation:

24Advanced Setup Guide (features vary by model)