HP SR5413WM, SR5558D, SR5470AN, SR5450F, SR5448F, SR5421F Advanced Setup Guide features vary by model

Wall to cable TV set-top box or satellite box to VCR and TV, using S-video cable or composite video cable between the box and the VCR or TV

1Do not detach any cables from the existing setup.

2Connect an additional cable by doing one of the following:

￿Connect one end of an S-video cable (not included) to a second output on the set-top box or satellite box. Connect the other end to the S-video In connector on the back of the computer.

Or

￿Connect one end of a composite video cable to a second output on the set-top box or satellite box. Connect the other end to the S-video-to-composite video adapter cable, and then connect the adapter to the S-video In connector on the back of the computer.

3If you are using a composite video or S-video cable, you must also connect audio cables (not included) from the satellite box or set-top box to the Audio In right (red) and Audio In left (white) connectors on the back of the computer.

4Connect the remote control sensor cable (emitter), and position it on the set-top box or satellite box. This enables the computer to change the channel on the box. See “Connecting the Remote Sensor.”

46Advanced Setup Guide (features vary by model)